Fanuc CNC 14” CRT Monitors
A61L-0001-0074 & A61L-0001-0094 Fanuc monitor
QES1514-035 Model (Formerly QES1514-018)
If you need a replacement monitor for your Fanuc CNC 14” CRT Monitor, look no further. Dynamic Displays’ new QES1514-035 LCD display is specifically designed to drop into the mounting holes of the original A61L-0001-0074 Fanuc monitor and A61L-0001-0094 Fanuc monitor console of Fanuc Controls 6, 10, 11, 12 and 15 systems, making it unnecessary to replace your original Fanuc CNC 14” CRT Monitor chassis. The video input of the QES1514-035 accepts the TTL video signals from the original FANUC system with no need for signal adapters of any sort.
This makes the QES1514-035 14 inch Fanuc monitor retrofit LCD display an ideal Fanuc Replacement Monitor for all A61L-0001-0074 Fanuc monitor and A61L-0001-0094 Fanuc monitor models, including the DNC 74 Monitor series; the Matsushita TX1404, TX1404AB, TX1424, TX1424AB and TX1450AB monitors; and the Hitachi C14C-1472DF, C14C-1472D1F and TX-1424AD monitors; and Toshiba D14CM-06A.
Additionally, while this unit has been optimized to operate at the 20.3KHz/55.25Hz FANUC control console timing, it also operates with a variety of other TTL legacy monitor timings, making it compatible with Tatung, Toshiba and GE monitors.
Product Details* |
|
|---|---|
QES1514-035 SPECIFICATIONS |
|
*To view product brochures and drawings you will need to download:
eDrawings Viewer and Adobe Acrobat Reader.
;)
Additional Slow Scan RGB Monitors:
• 9" FANUC Control Color LCD Display
• 12" Color Fanuc Monitor
• 10" LCD Replacement 12" CRT Monitor
• 12" Allen Bradley CRTC1
• 12" Allen Bradley CRTC
• 12" Allen Bradley Retrofit Monitor
• 14” Mazak CNC Monitor
• 14" Fanuc CNC Replacement Monitor
• 14” Open Frame Monitor Replacement
• 15" Kitchen Replacement Monitor
• 19/20" CRT to LCD Upgrades
• 19/20" CRT to LCD Upgrades - Enhance
• Legacy Cross Reference Page
Features:
• A61L-0001-0074 Fanuc monitor replacement
• A61L-0001-0094 Fanuc monitor replacement
• Matsushita TX-1404 monitor replacement
• Matsushita TX-1404AB monitor replacement
• Matsushita TX-1424 monitor replacement
• Matsushita TX-1424AB monitor replacement
• Hitachi C14C-1472DF, C14C-14D1F and TX-1424AD monitor replacement
• Toshiba D14CM-06A monitor Replacement
• Drop directly into the mounting holes of a 14 inch CRT Monitor
• Open-Frame Chassis drops directly into a Fanuc Control Console
• TTL Input
• Heavy Duty Cold Roll Steel Chassis
Please access the following link for an informative paper concerning the LCD as CRT replacements in legacy equipment
